.gitignore

@@ -1,5 +0,0 @@
-*.egg-info
-*.swp
-__pycache__
-build
-venv

README.md

@@ -6,31 +6,24 @@ licensed under GPL-2.0.
 
 home: https://git.grandou.net/gilles/runon
 
-Runon is a frontend to podman allowing to run seamlessly any application in
-any linux based operating system, including graphical applications, while
-keeping the host user environment.
-
-the v1 legacy runon branch was based on docker. Current versions are now
-relying on podman.
-
 
 Quick HOWTO
 -----------
 
     $ grep ^PRETTY_NAME /etc/os-release
-    PRETTY_NAME="Debian GNU/Linux 12 (bookworm)"
+    PRETTY_NAME="Debian GNU/Linux 10 (buster)"
 
     $ runon centos7 grep ^PRETTY_NAME /etc/os-release
     PRETTY_NAME="CentOS Linux 7 (Core)"
 
     $ runon ubuntu20.04 grep ^PRETTY_NAME /etc/os-release
-    PRETTY_NAME="Ubuntu 20.04.6 LTS"
+    PRETTY_NAME="Ubuntu 20.04.2 LTS"
 
     $ runon debian9 grep ^PRETTY_NAME /etc/os-release
     PRETTY_NAME="Debian GNU/Linux 9 (stretch)"
 
-    $ runon rocky9 xterm
+    $ runon centos7 xclock
-    [xterm launched!]
+    [xclock launched!]
 
 
 Install
@@ -38,101 +31,67 @@ Install
 
 Installation has been tested on:
 
-* Debian 11 (bullseye)
+* Debian 10 (buster)
-* Debian 12 (bookworm)
+* Ubuntu 20.04 (Focal)
-* RockyLinux 9.3 (Blue Onyx)
 
 However it should work straightforward on any equivalent system.
 
-### Podman Install
+### Docker Install
 
-If not already installed, just run as root the suitable command for your system:
+    sudo apt install docker
+    sudo systemctl enable --now docker
 
-    apt install podman
+Check that your are member of `docker` group:
-    dnf install podman
 
-To check that podman is correctly installed, just try:
+    sudo adduser <user> docker
 
-    $ podman run -it hello-world
+If needed, you need to logout and login again for the new group to
-    Resolved "hello-world" as an alias (/etc/containers/registries.conf.d/shortnames.conf)
+become active.
-    Trying to pull docker.io/library/hello-world:latest...
-    Getting image source signatures
-    Copying blob 719385e32844 done  
-    Copying config 9c7a54a9a4 done  
-    Writing manifest to image destination
-    Storing signatures
-    
-    Hello from Docker!
-    This message shows that your installation appears to be working correctly.
-    [...]
-
-If your encounter an error like this one:
-
-    Error: writing blob: adding layer with blob "sha256:3331450fb84fde695e565405a554d5cf213a33826da197b29aabde08be012f8b": Error processing tar file(exit status 1): potentially insufficient UIDs or GIDs available in user namespace (requested 0:42 for /etc/gshadow): Check /etc/subuid and /etc/subgid: lchown /etc/gshadow: invalid argument
-
-it's likely that your user account has been create a while ago on a legacy
-distribution release and has no support for `subuid` and `subgid`. You can
-fix it easily with these commands:
-
-    sudo usermod --add-subgids 10000-75535 $USER
-    sudo usermod --add-subuids 10000-75535 $USER
-    podman system migrate
-    podman pull
-
-If you're running on a Debian system, there is a good explanation of the above problem in `/usr/share/doc/podman/README.Debian`.
 
 ### Python Dependencies
 
-There is no specific dependency, you just need to insure to have:
+    sudo apt install python3-docker python3-dockerpty python3-xdg
-
-* a Python release 3.6 or better
-* the python `venv` module
-* the python `pip` module
-
 
 ### manual install
 
     cd <tools>
     git clone  https://git.grandou.net/gilles/runon
 
-local install, in your `~/.local/bin`
+local install, in your `~/local/bin` (or wherever directory which is in your
+PATH):
 
     cd <runon>
-    ./install
+    ./install local
 
-If you plan to work `runon` development, you can
+or
-pass `--dev` to install links to your current git clone:
 
-    ./install --dev
+    ./install local <your_bin_path>
 
-each user can have its own configuration in `~/.config/runon/runon.conf`.
+system install, for all users:
 
-You can keep your configuration in several places, the 1st one which is
+    cd <runon>
-find is used:
+    sudo ./install system
-
-* `runon.yaml` in the current directory
-* `.runon.yaml` in the current directory
-* `~/.config/runon/runon.yaml`
-* `~/.config/runon/runon.default.yaml`, the configuration file installed by
-  default
 
+each user can have its own configuration in `~/.config/runon/runon.conf`
+if needed.
 
 ### uninstall
 
-To uninstall, just run:
+simply pass `-u` to install command you have used, eg.:
-
-    ./uninstall
 
+    ./install local -u
+    ./install local -u <dir>
+    sudo ./install system -u
 
 ### some convenient links
 
 you can create soft links to `runos` to simplify calls:
 
-    runos -l centos7
+    runos centos7 -l
 
 now calling `centos7 ...` is equivalent to call `runos centos7 ...`:
 
-    centos7 xterm
+    centos7 xclock
 
 
 Usage
@@ -142,8 +101,7 @@ With the default configuration, a seamless environment is set up,
 allowing to transparently run commands in various environments, while
 keeping:
 
-* user environment (uid, gid, home directory, ...)
+* user environment (uid, gid, password, home directory, ...)
-* password less sudo support
 * X support to run graphical applications
 
 ### Basic usage
@@ -154,7 +112,11 @@ keeping:
 
 ### available options
 
-* `-v` verbose output, display information on the current startup step
+* `-v` verbose output, this is really usefull when running new
+  containers for the first time, as the initial docker build can be
+  quite long (several minutes) especially with slow internet link.
+  If the command seems to be stalled, don't hesitate to interrupt it
+  (with `CTRL-C`) and to restart it with `-v`.
 
 * `-u` forces the container image to be updated, useful if the
   distribution has been updated and you want to use it. Otherwise,
@@ -164,38 +126,6 @@ keeping:
 * `-c <configfile>` uses a custom config file, useful to try new
   distribution without breaking your running config.
 
-* `-l` create an executable link with the `osname` name. you can after
-  run the command with `osname [...]` instead of `runos osname [...]`
-
-### Listing available distributions:
-
-Just run:
-
-    $ runon list
-    Available distributions:
-      centos7
-      debian10
-      debian11
-      debian12
-      debian9
-      rocky8
-      rocky9
-      ubuntu20.04
-      ubuntu22.04
-
-This lists all `osname` present in your current configuration file.
-
-### Editing configuration:
-
-you can easily open the current configuration file with:
-
-    $ runon edit
-
-If you open the `runon.default.yaml` file, take care to save your changes in
-a new `runon.yaml` file to avoid the default one, which could be overwritten
-next time you install or update `runon`.
-
-
 ### Interactive shell
 
 Just run:
@@ -204,98 +134,84 @@ Just run:
 
 while start an insteractive shell in the container system:
 
-    $ runon ubuntu22.04
+    gilles@host:~$ runon centos8
-    (ubuntu22.04) gilles@host:~$ cat /etc/os-release 
+    (centos8) gilles@host:~$ cat /etc/os-release
-    PRETTY_NAME="Ubuntu 22.04.3 LTS"
+    NAME="CentOS Linux"
-    NAME="Ubuntu"
+    VERSION="8"
-    VERSION_ID="22.04"
+    ID="centos"
-    VERSION="22.04.3 LTS (Jammy Jellyfish)"
+    ID_LIKE="rhel fedora"
-    VERSION_CODENAME=jammy
+    VERSION_ID="8"
-    ID=ubuntu
+    PLATFORM_ID="platform:el8"
-    ID_LIKE=debian
+    PRETTY_NAME="CentOS Linux 8"
-    HOME_URL="https://www.ubuntu.com/"
+    ANSI_COLOR="0;31"
-    SUPPORT_URL="https://help.ubuntu.com/"
+    CPE_NAME="cpe:/o:centos:centos:8"
-    BUG_REPORT_URL="https://bugs.launchpad.net/ubuntu/"
+    HOME_URL="https://centos.org/"
-    PRIVACY_POLICY_URL="https://www.ubuntu.com/legal/terms-and-policies/privacy-policy"
+    BUG_REPORT_URL="https://bugs.centos.org/"
-    UBUNTU_CODENAME=jammy
+    CENTOS_MANTISBT_PROJECT="CentOS-8"
-    (ubuntu22.04) gilles@host:~$ xclock 
+    CENTOS_MANTISBT_PROJECT_VERSION="8"
+    (centos8) gilles@host:~$ id
+    uid=1000(gilles) gid=1000(gilles) groups=1000(gilles)
+    (centos8) gilles@host:~$ sudo id
+    [sudo] password for gilles:
+    uid=0(root) gid=0(root) groups=0(root)
+    (centos8) gilles@host:~$ xclock
     ^C
-    (ubuntu22.04) gilles@host:~$ exit
+    (centos8) gilles@host:~$ exit
     exit
-
+    gilles@host:~$
-To help differentiate the environment on are running on, you can add this
-snippet to your `.bashrc`:
-
-    # container
-    if [ -n "$container" ]; then
-        PS1="($container) $PS1"
-    fi
-
-This now displays your `runon` name on your bash prompt.
 
 
 Configuration
 -------------
 
-Configuration is done in `runon.yaml` file, which describes supported
+Configuration is done in `runon.conf` file, which describes supported
-distribution in YAML format.
+distribution in .INI format.
 
 ### Example config
 
 ```
-rh_base: &rh_base
+[DEFAULT]
-  dockerfile:
+environment =
-    - RUN dnf install -y sudo
+    HOME
-    - RUN echo "Defaults lecture = never" >> /etc/sudoers
+    USER
-    - RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
+    DISPLAY
-    - RUN dnf group install -y "Development Tools"
+    debian_chroot=${osname}
-  pkginstall:
-    "RUN dnf install -y {}"
-  packages:
-    - xterm
-    - vim-X11
-    - git
-    - python3
-    - bash-completion
-  binds:
-    - /etc/timezone:ro
-    - /etc/localtime:ro
-    - "{home}"
-  environment:
-    - USER
-    - DISPLAY
-    - TERM
-    - container={osname}
 
-centos7:
-  <<: *rh_base
-  image: docker.io/centos:7
-  dockerfile:
-    - RUN yum install -y sudo
-    - RUN echo "Defaults lecture = never" >> /etc/sudoers
-    - RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
-    - RUN yum group install -y "Development Tools"
-  pkginstall:
-    "RUN yum install -y {}"
 
-rocky8:
+binds =
-  <<: *rh_base
+    /etc/passwd:ro
-  image: docker.io/rockylinux:8
+    /etc/group:ro
+    /etc/shadow:ro
+    /tmp/.X11-unix:ro
+    /home/${user}
 
-rocky9:
+[centos8]
-  <<: *rh_base
+dockerfile =
-  image: docker.io/rockylinux:9
+    FROM centos:8
+    RUN yum install dnf-plugins-core -y
+    RUN yum config-manager --set-enabled powertools -y
+    RUN yum install sudo -y
+    RUN echo "Defaults lecture = never" >> /etc/sudoers
+    RUN echo "ALL ALL=(ALL) ALL" >> /etc/sudoers
+pkginstall = RUN yum install {} -y
+packages = ksh csh xterm xorg-x11-apps xkeyboard-config git
+
+[debian9]
+dockerfile =
+    FROM debian:9
+    RUN apt-get update
+    RUN apt-get -y install sudo
+    RUN echo "Defaults lecture = never" >> /etc/sudoers
+pkginstall = RUN apt-get -y install {}
+packages = ksh csh xterm x11-apps libgtk-3-0 build-essential git
 ```
 
-Each entry which contains an `image:` field defines a distribution which can
+Each section `[osname]` defines a distribution which can be used by runon.
-be used by runon. In the above example the other entries are used as templates
+The `[DEFAULT]` section defines default values which is used if not
-for real entries.
+overriden in individual section.
-
 
 ### Config entries
 
-* `image` the base image used to build the container.
-
 * `dockerfile` the base content of dockerfile which will be used to
   generate the running environment. There is usually no need to diverge
   from the ones given in example.
@@ -314,15 +230,12 @@ for real entries.
 * `environment` the list of environment variables you want to pass or
   set in the container system. See below for a description
 
-Lines starting with `#` or are comments.
+Lines starting with `#` or `;` are comments.
 
 Some substitution happens upon reading the configuration:
 
-* `{osname}` the executed distribution.
+* `${user}` the current username
-* `{user}` the current username
+* `${osname}` the executed distribution.
-* `{uid}` the current UID
-* `{home}` the user's home directory
-
 
 ### Binds
 

install

@@ -1,41 +1,103 @@
-#!/bin/bash
+#!/usr/bin/bash
 
-srcdir=$(dirname $(readlink -f $0))
+local_bin_dir=~/local/bin
-venvdir=~/.local/lib/runon
+local_config_dir=~/.config/runon
-bindir=~/.local/bin
+system_bin_dir=/usr/local/bin
-configdir=~/.config/runon
+system_config_dir=/etc/runon
 
-if [ "$1" == "--dev" ]; then
+op=install
-    editable=--editable
+bin_dir=$local_bin_dir
-    devmode=1
+config_dir=$local_config_dir
+
+function usage
+{
+    echo "$0 [local|system] [-u|--uninstall] [<dest>]"
+    echo
+    echo "  local            install for local user, by default"
+    echo "  system           install for all users"
+    echo "  dev              install in dev mode (create links to source)"
+    echo "  -u, --uninstall  local or system uninstall"
+    echo "  <dest>           destination dir for binary"
+    echo 
+    echo "default local paths:"
+    echo "  binary: $local_bin_dir"
+    echo "  config: $local_config_dir"
+    echo
+    echo "default system paths:"
+    echo "  binary: $system_bin_dir"
+    echo "  config: $system_config_dir"
+    echo
+}
+
+function do_exec
+{
+    echo "$@"
+    "$@"
+}
+
+while [ $# -gt 0 ]; do
+    case $1 in
+        local)
+            bin_dir=$local_bin_dir
+            config_dir=$local_config_dir
+            ;;
+        system)
+            bin_dir=$system_bin_dir
+            config_dir=$system_config_dir
+            ;;
+        dev)
+            bin_dir=$local_bin_dir
+            config_dir=$local_config_dir
+            op=installdev
+            ;;
+        -u) 
+            op=uninstall
+            ;;
+        --uninstall)
+            op=uninstall
+            ;;
+        -h*)
+            usage
+            exit 0
+            ;;
+        *)  bin_dir=$1
+            ;;
+    esac
+    shift
+done
+
+bin_dir=$(realpath $bin_dir)
+config_dir=$(realpath $config_dir)
+
+if [[ ":$PATH:" != *":$bin_dir:"* ]]; then
+    echo "WARNING: $bin_dir is not in your PATH, runon will not be automatically found."
+    echo
 fi
 
-if [ ! -d $venvdir/bin/activate ]; then
+set -e
-    echo "create virtualenv $venvdir..."
+
-    python3 -m venv $venvdir
+if [ "$op" = "install" ]; then
+    do_exec install -d $bin_dir
+    do_exec install -d $config_dir
+    #rm -f $bin_dir/runon
+    #rm -f $config_dir/runon
+    do_exec install runon $bin_dir
+    do_exec install runon.conf $config_dir
+elif [ "$op" = "installdev" ]; then
+    do_exec install -d $bin_dir
+    do_exec install -d $config_dir
+    do_exec ln -s -f $(realpath runon) $bin_dir/
+    do_exec ln -s -f $(realpath runon.conf) $config_dir/
+elif [ "$op" = "uninstall" ]; then
+    # find all symlinks targetting to runon, and remove them
+    find $bin_dir -type l | while read l; do
+        if [ "$(readlink $l)" = "runon" ]; then
+            do_exec rm $l
         fi
-source $venvdir/bin/activate
+    done
 
-echo "populate $venvdir..."
+    do_exec rm -f $bin_dir/runon
-python3 -m pip install --upgrade pip
+    do_exec rm -f $config_dir/runon.conf
-python3 -m pip install wheel
+    test -d $bin_dir && do_exec rmdir --parents --ignore-fail-on-non-empty $bin_dir 2> /dev/null
-python3 -m pip install $editable $srcdir
+    test -d $config_dir && do_exec rmdir --parents --ignore-fail-on-non-empty $config_dir 2> /dev/null
-
-echo "create links in $bindir..."
-mkdir -p $bindir
-ln -sf $venvdir/bin/runon $bindir/
-
-echo "install base config in $configdir..."
-mkdir -p $configdir
-if [ -n "$devmode" ]; then
-    ln -s $srcdir/runon.default.yaml $configdir/
-else
-    cp -p $srcdir/runon.default.yaml $configdir/
-fi
-
-echo "done."
-
-if [[ ":$PATH:" != *":$(readlink -f $bindir):"* ]]; then
-    echo ""
-    echo "WARNING: $bindir is not in your PATH"
 fi

runon

@@ -0,0 +1,217 @@
+#!/usr/bin/env python3
+
+import sys
+import argparse
+import docker
+import dockerpty
+import io
+import json
+import getpass
+import platform
+import os
+import re
+import xdg.BaseDirectory
+import configparser
+import subprocess
+from pprint import pprint
+
+
+def natural_sortkey(string):
+    tokenize = re.compile(r'(\d+)|(\D+)').findall
+    return tuple(int(num) if num else alpha for num, alpha in tokenize(string))
+
+def read_ini(user_confname, osname=''):
+    ini_list = [ 'runon.conf', '.runon.conf', os.path.join(xdg.BaseDirectory.xdg_config_home, 'runon', 'runon.conf'), '/etc/runon/runon.conf' ]
+    defaults = {
+        'osname': osname,
+        'user': getpass.getuser()
+    }
+    if user_confname:
+        ini_list.insert(0, user_confname)
+    ini = configparser.ConfigParser(defaults=defaults, interpolation=configparser.ExtendedInterpolation())
+    ini.read(ini_list)
+    return ini
+
+def list_osnames(user_confname):
+    ini = read_ini(user_confname)
+    return ini.sections()
+
+def load_config(user_confname, osname):
+    ini = read_ini(user_confname, osname)
+    if not ini.has_section(osname):
+        print('ERROR: cannot find configuration for distribution "{}"'.format(osname))
+        sys.exit(1)
+    conf = {}
+    fields = [ 'dockerfile', 'pkginstall', 'packages', 'environment', 'binds', 'user', 'osname' ]
+    try:
+        for f in fields:
+            conf[f] = ini.get(osname, f)
+    except configparser.NoOptionError as e:
+        print('ERROR: {}'.format(e))
+        sys.exit(1)
+    for f in [ 'dockerfile', 'environment', 'binds' ]:
+        conf[f] = [ i for i in conf[f].split('\n') if i ]
+    for f in [ 'packages' ]:
+        conf[f] = conf[f].split()
+    return conf
+
+
+def make_osname_link(binpath, osname):
+    link = os.path.join(os.path.dirname(binpath), osname)
+    try:
+        os.symlink('runon', link)
+    except FileExistsError:
+        pass
+
+def make_image_name(osname):
+    user = getpass.getuser()
+    name = 'runon-{}-{}'.format(osname, user)
+    return name
+
+
+def build_image(client, conf, update, verbose):
+    packages = conf['packages']
+    dockerfile = conf['dockerfile']
+    pkginstall = conf['pkginstall']
+    for p in packages:
+        dockerfile.append(pkginstall.format(p))
+    tag = make_image_name(conf['osname'])
+    try:
+        if verbose:
+            # fallback to external command 'docker build' as there is
+            # no way to follow the build progress with API.
+            print('Building image {} ...'.format(tag))
+            cmd = ['docker', 'build']
+            if update:
+                cmd.append('--no-cache')
+            cmd += ['-t', tag, '-']
+            ret = subprocess.run(cmd,
+                                 input='\n'.join(dockerfile).encode('utf-8'),
+                                 stderr=subprocess.STDOUT, check=True)
+            image = client.images.get(tag)
+        else:
+            with io.BytesIO('\n'.join(dockerfile).encode('utf-8')) as fd:
+                image, logs = client.images.build(tag=tag, fileobj=fd, rm=True, nocache=update)
+            if verbose:
+                print('Built image {} / {}'.format(image.tags[0], image.short_id))
+                for l in logs:
+                    print(l.get('stream', '').strip('\n'))
+    except (docker.errors.BuildError, KeyboardInterrupt, subprocess.CalledProcessError, docker.errors.ImageNotFound) as e:
+        print('Build Error: {}'.format(e))
+        print()
+        print('with dockerfile:')
+        for line in dockerfile:
+            print('  {}'.format(line))
+        sys.exit(1)
+    return image
+
+
+def create_container(client, image, conf, command, verbose):
+    volumes = {}
+    environment = {}
+    for mnt in conf['binds']:
+        mnt = mnt.split(':')
+        if mnt[-1] in ['ro','rw']:
+            mode = mnt[-1]
+            del mnt[-1]
+        else:
+            mode = 'rw'
+        mnt = mnt[:2]
+        bind = mnt[-1]
+        vol = mnt[0]
+        volumes[vol] = { 'bind': bind, 'mode': mode }
+    hostname = platform.node()
+    for v in conf['environment']:
+        e = v.split('=')
+        if len(e) == 1:
+            e.append(os.getenv(e[0]))
+        environment[e[0]] = e[1]
+    #environment['debian_chroot']=conf['osname']
+    user='{}:{}'.format(os.getuid(), os.getgid())
+    pwd=os.getcwd()
+
+    container = client.containers.create(image, command,
+                                         detach=False, stdin_open=True, tty=True,
+                                         auto_remove=True,
+                                         hostname=hostname,
+                                         volumes=volumes,
+                                         environment=environment,
+                                         user=user,
+                                         network_mode='host',
+                                         working_dir=pwd
+                                         )
+    return container
+
+
+def run_container(client, container):
+    try:
+        dockerpty.start(client.api, container.id)
+        container.reload()  # to update attrs fields
+    except docker.errors.APIError as e:
+        print('ERROR: {}'.format(e))
+        sys.exit(1)
+    ret = container.attrs['State']['ExitCode']
+    return ret
+
+
+def main():
+    osname = None
+    run_name = os.path.basename(os.sys.argv[0])
+    if run_name == 'runos':
+        pass
+    elif run_name.startswith('runon'):
+        m = re.match('runon[-_]?(.*)$', run_name)
+        if m:
+            osname = m[1]
+    else:
+        osname = run_name
+
+    parser = argparse.ArgumentParser()
+    if osname:
+        parser.description = 'run commands on "{}" distribution'.format(osname)
+    else:
+        parser.description = 'run commands on any distribution'
+        parser.add_argument('osname',
+                            help = 'distribution name to run on, '
+                            '"list" to dump all available distributions')
+    parser.epilog = '(c) 2021 Gilles Grandou <gilles@grandou.net>'
+
+    parser.add_argument('-v', '--verbose', action='store_true',
+                        help='verbose output')
+    parser.add_argument('-c', '--config',
+                        help='specify config file')
+    parser.add_argument('-u', '--update', action='store_true',
+                        help='force image update')
+    parser.add_argument('-l', '--link', action='store_true',
+                        help='create a symlink to call "osname" as a shortcut to "runon osname"')
+    parser.add_argument('command', nargs='*', default=None,
+                        help = 'command to execute')
+
+    args = parser.parse_args()
+    if osname:
+        args.osname = osname
+
+    if args.osname == 'list':
+        osnames = list_osnames(args.config)
+        print('Available distributions:')
+        for o in sorted(osnames, key=natural_sortkey):
+            print('  {}'.format(o))
+        print()
+        if args.link:
+            for o in osnames:
+                make_osname_link(sys.argv[0], args.osname)
+        return 0
+
+    client = docker.from_env()
+    conf = load_config(args.config, args.osname)
+    if args.link:
+        make_osname_link(sys.argv[0], args.osname)
+    image = build_image(client, conf, args.update, args.verbose)
+    container = create_container(client, image, conf, args.command, args.verbose)
+    ret = run_container(client, container)
+    return ret
+
+
+if __name__ == '__main__':
+    ret = main()
+    sys.exit(ret)

runon.conf

@@ -0,0 +1,110 @@
+[DEFAULT]
+environment =
+    HOME
+    USER
+    DISPLAY
+    TERM
+    debian_chroot=${osname}
+
+binds =
+    /etc/timezone:ro
+    /etc/localtime:ro
+    /etc/passwd:ro
+    /etc/group:ro
+    /etc/shadow:ro
+    /tmp/.X11-unix:ro
+    /home/${user}
+
+[centos7]
+dockerfile =
+	  FROM centos:7
+    RUN yum install sudo -y
+    RUN echo "Defaults lecture = never" >> /etc/sudoers
+    RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
+pkginstall = RUN yum install {} -y
+packages = ksh csh xterm xorg-x11-apps xkeyboard-config git glibc-devel gtk2 gtk3 alsa-lib python2 python3 bash-completion redhat-lsb-core environment-modules
+
+[centos8]
+dockerfile =
+	  FROM centos:8
+    RUN sed -i 's/mirrorlist/#mirrorlist/g' /etc/yum.repos.d/CentOS-*
+    RUN sed -i 's|#baseurl=http://mirror.centos.org|baseurl=http://vault.centos.org|g' /etc/yum.repos.d/CentOS-*
+    RUN yum install dnf-plugins-core -y
+    RUN yum config-manager --set-enabled powertools -y
+    RUN yum install sudo -y
+    RUN echo "Defaults lecture = never" >> /etc/sudoers
+    RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
+pkginstall = RUN yum install {} -y
+packages = ksh csh xterm xorg-x11-apps xkeyboard-config git glibc-devel gtk2 gtk3 alsa-lib python2 python3 bash-completion environment-modules
+
+[debian8]
+dockerfile =
+	  FROM debian:8
+    ARG DEBIAN_FRONTEND=noninteractive
+    RUN apt-get update
+    RUN apt-get -y install apt-utils
+    RUN apt-get -y upgrade
+    RUN apt-get -y install sudo
+    RUN echo "Defaults lecture = never" >> /etc/sudoers
+    RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
+pkginstall = RUN apt-get -y install {}
+packages = ksh csh xterm x11-apps build-essential git libgtk2.0 libgtk-3-0 bash-completion tcl environment-modules
+
+[debian9]
+dockerfile =
+	  FROM debian:9
+    ARG DEBIAN_FRONTEND=noninteractive
+    RUN apt-get update
+    RUN apt-get -y install apt-utils
+    RUN apt-get -y upgrade
+    RUN apt-get -y install sudo
+    RUN echo "Defaults lecture = never" >> /etc/sudoers
+    RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
+pkginstall = RUN apt-get -y install {}
+packages = ksh csh xterm x11-apps build-essential git libgtk2.0 libgtk-3-0 bash-completion tcl environment-modules
+
+[debian10]
+dockerfile =
+	  FROM debian:10
+    ARG DEBIAN_FRONTEND=noninteractive
+    RUN apt-get update
+    RUN apt-get -y install apt-utils
+    RUN apt-get -y upgrade
+    RUN apt-get -y install sudo
+    RUN echo "Defaults lecture = never" >> /etc/sudoers
+    RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
+pkginstall = RUN apt-get -y install {}
+packages = ksh csh xterm x11-apps build-essential git libgtk2.0 libgtk-3-0 bash-completion tcl environment-modules
+
+[debian11]
+dockerfile =
+	  FROM debian:bullseye
+    ARG DEBIAN_FRONTEND=noninteractive
+    RUN apt-get update
+    RUN apt-get -y install apt-utils
+    RUN apt-get -y install sudo
+    RUN echo "Defaults lecture = never" >> /etc/sudoers
+pkginstall = RUN apt-get -y install {}
+packages = ksh csh xterm x11-apps build-essential git libgtk2.0 libgtk-3-0 bash-completion tcl environment-modules
+
+[ubuntu20.04]
+dockerfile =
+    FROM ubuntu:20.04
+    ARG DEBIAN_FRONTEND=noninteractive
+    RUN apt-get update
+    RUN apt-get -y install apt-utils
+    RUN apt-get -y install sudo
+pkginstall = RUN apt-get -y install {}
+packages = ksh csh xterm x11-apps build-essential git libgtk2.0 libgtk-3.0 bash-completion tcl environment-modules
+
+
+[ubuntu22.04]
+dockerfile =
+    FROM ubuntu:22.04
+    ARG DEBIAN_FRONTEND=noninteractive
+    RUN apt-get update
+    RUN apt-get -y install apt-utils
+    RUN apt-get -y install sudo
+pkginstall = RUN apt-get -y install {}
+packages = ksh csh xterm x11-apps build-essential git libgtk2.0 libgtk-3.0 bash-completion tcl environment-modules
+

runon.default.yaml

@@ -1,107 +0,0 @@
-
-debian_base: &debian_base
-  dockerfile:
-    - ARG DEBIAN_FRONTEND=noninteractive
-    - RUN apt-get update
-    - RUN apt-get -y install apt-utils
-    - RUN apt-get -y upgrade
-    - RUN apt-get -y install sudo
-    - RUN echo "Defaults lecture = never" >> /etc/sudoers
-    - RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
-  pkginstall:
-    "RUN apt-get -y install {}"
-  packages:
-    - xterm
-    - x11-apps
-    - vim-gtk3
-    - git
-    - build-essential
-    - python3
-    - bash-completion
-  binds:
-    - /etc/timezone:ro
-    - /etc/localtime:ro
-    - "{home}"
-  environment:
-    - USER
-    - DISPLAY
-    - TERM
-    - container={osname}
-
-debian9:
-  <<: *debian_base
-  image: docker.io/debian:9
-  dockerfile:
-    - ARG DEBIAN_FRONTEND=noninteractive
-    - RUN echo "deb http://archive.debian.org/debian stretch main" > /etc/apt/sources.list
-    - RUN apt-get update
-    - RUN apt-get -y upgrade
-    - RUN apt install -y --allow-downgrades libnettle6=3.3-1+b2  # default libnettle6 conflicts with libgtk-3.0
-    - RUN apt-get -y install sudo
-    - RUN echo "Defaults lecture = never" >> /etc/sudoers
-    - RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
-
-debian10:
-  <<: *debian_base
-  image: docker.io/debian:10
-
-debian11:
-  <<: *debian_base
-  image: docker.io/debian:11
-
-debian12:
-  <<: *debian_base
-  image: docker.io/debian:12
-
-ubuntu20.04:
-  <<: *debian_base
-  image: docker.io/ubuntu:20.04
-
-ubuntu22.04:
-  <<: *debian_base
-  image: docker.io/ubuntu:22.04
-
-rh_base: &rh_base
-  dockerfile:
-    - RUN dnf install -y sudo
-    - RUN echo "Defaults lecture = never" >> /etc/sudoers
-    - RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
-    - RUN dnf group install -y "Development Tools"
-  pkginstall:
-    "RUN dnf install -y {}"
-  packages:
-    - xterm
-    - vim-X11
-    - git
-    - python3
-    - bash-completion
-  binds:
-    - /etc/timezone:ro
-    - /etc/localtime:ro
-    - "{home}"
-  environment:
-    - USER
-    - DISPLAY
-    - TERM
-    - container={osname}
-
-
-centos7:
-  <<: *rh_base
-  image: docker.io/centos:7
-  dockerfile:
-    - RUN yum install -y sudo
-    - RUN echo "Defaults lecture = never" >> /etc/sudoers
-    - RUN echo "ALL ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
-    - RUN yum group install -y "Development Tools"
-  pkginstall:
-    "RUN yum install -y {}"
-
-rocky8:
-  <<: *rh_base
-  image: docker.io/rockylinux:8
-
-rocky9:
-  <<: *rh_base
-  image: docker.io/rockylinux:9
-

runon/runon.py

@@ -1,230 +0,0 @@
-import sys
-import os
-import argparse
-import getpass
-import pathlib
-import xdg.BaseDirectory
-import yaml
-import datetime
-import pytz
-import subprocess
-from pprint import pprint
-
-
-def find_config_file(user_conf):
-    conf_list = [
-            'runon.yaml',
-            '.runon.yaml',
-            os.path.join(xdg.BaseDirectory.xdg_config_home, 'runon', 'runon.yaml'),
-            os.path.join(xdg.BaseDirectory.xdg_config_home, 'runon', 'runon.default.yaml')
-            ]
-    if user_conf:
-        conf_list = [ user_conf ]
-    for conf in conf_list:
-        if os.path.exists(conf):
-            return conf
-    return None
-
-
-def read_yaml(conf_file):
-    try:
-        with open(conf_file, 'r') as file:
-            conf = yaml.safe_load(file)
-            conf['stamp'] = datetime.datetime.fromtimestamp(os.path.getmtime(conf_file), tz=pytz.UTC)
-        return conf
-    except yaml.YAMLError as e:
-        print(f'ERROR: bad configuration file:')
-        print(e)
-        sys.exit(1)
-    return conf
-
-def list_osnames(conf_file):
-    conf = read_yaml(conf_file)
-    osnames = []
-    for key in conf:
-        if (type(conf[key]) is dict) and conf[key].get('image'):
-            osnames.append(key)
-    return osnames
-
-
-def load_config(conf_file, osname):
-    user_vars = {
-            'osname': osname,
-            'user': getpass.getuser(),
-            'uid': os.getuid(),
-            'home': pathlib.Path.home(),
-            }
-    conf = read_yaml(conf_file)
-    osconf = conf.get(osname)
-    if not osconf:
-        print(f"ERROR: cannot find configuration for distribution {osname}")
-        sys.exit(1)
-
-    osconf['stamp'] = conf.get('stamp')
-    osconf['osname'] = osname
-    for k in [ 'dockerfile', 'packages', 'environment', 'binds' ]:
-        if osconf.get(k):
-            osconf[k] = [ s.format(**user_vars) for s in osconf[k]]
-    return osconf
-
-
-def make_osname_link(binpath, osname):
-    link = os.path.join(os.path.dirname(binpath), osname)
-    try:
-        os.symlink('runon', link)
-    except FileExistsError:
-        pass
-
-
-def build_image(conf, update, verbose):
-    osname = conf.get('osname')
-    image_name = 'runon-{}'.format(osname)
-    cache_dir = os.path.join(xdg.BaseDirectory.xdg_cache_home, 'runon')
-    cache_file = os.path.join(cache_dir, image_name)
-
-    if not update and os.path.exists(cache_file):
-        ts_image = datetime.datetime.fromtimestamp(os.path.getmtime(cache_file), tz=pytz.UTC)
-        ts_conf = conf.get('stamp')
-        if verbose:
-            print('config: {}'.format(ts_conf))
-            print('image:  {}'.format(ts_image))
-        if ts_image and ts_image > ts_conf:
-            if verbose:
-                print('image: {} up-to-date'.format(image_name))
-            return image_name
-
-    image = conf.get('image')
-    dockerfile = conf.get('dockerfile')
-    pkginstall = conf.get('pkginstall')
-    packages = conf.get('packages')
-    if not dockerfile:
-        dockerfile = []
-    if image:
-        dockerfile.insert(0, 'FROM {}'.format(image))
-    if packages:
-        for p in packages:
-            dockerfile.append(pkginstall.format(p))
-
-    if verbose:
-        print('Dockerfile:')
-        for l in dockerfile:
-            print(' * {}'.format(l))
-        print('Building image {} ...'.format(image_name))
-    cmd = ['podman', 'build']
-    if update:
-        cmd.append('--no-cache')
-    cmd += ['-t', image_name, '-']
-    ret = subprocess.run(cmd,
-                         input='\n'.join(dockerfile).encode('utf-8'),
-                         stderr=subprocess.STDOUT, check=True)
-
-    if not os.path.exists(cache_dir):
-        os.mkdir(cache_dir)
-    with open(cache_file, 'w') as file:
-        if verbose:
-            print('cache: {}'.format(cache_file))
-        file.write('')
-
-    return image_name
-
-
-def run_image(name, conf, command, verbose):
-    volumes = {
-            }
-    environment = {}
-    if conf.get('binds'):
-        for mnt in conf['binds']:
-            mnt = mnt.split(':')
-            if mnt[-1] in ['ro','rw']:
-                mode = mnt[-1]
-                del mnt[-1]
-            else:
-                mode = 'rw'
-            mnt = mnt[:2]
-            bind = mnt[-1]
-            vol = mnt[0]
-            if os.path.exists(vol):
-                volumes[vol] = { 'bind': bind, 'mode': mode }
-    if conf.get('environment'):
-        for v in conf['environment']:
-            e = v.split('=')
-            if len(e) == 1:
-                e.append(os.getenv(e[0]))
-            environment[e[0]] = e[1]
-
-    cmd = ['podman', 'run', '--rm', '--interactive', '--tty', '--userns=keep-id', '--net=host' ]
-    for e in environment:
-        cmd += [ '-e', '{}={}'.format(e, environment[e]) ]
-    for v in volumes:
-        cmd += [ '-v', ':'.join([v, volumes[v]['bind'], volumes[v]['mode']]) ]
-    cmd += [ '--workdir', os.getcwd() ]
-    cmd += [ name ]
-    if command:
-        cmd += command
-    if verbose:
-        print('executing: {}\n'.format(' '.join(cmd)))
-    ret = subprocess.run(cmd)
-    return ret.returncode
-
-
-def main():
-    osname = None
-    run_name = os.path.basename(os.sys.argv[0])
-    if run_name == "runon":
-        pass
-    elif run_name.startswith("runon_"):
-        osname = run_name[len("runon_"):]
-    else:
-        osname = run_name
-
-    parser = argparse.ArgumentParser()
-    if osname:
-        parser.description = 'run commands on "{}" distribution'.format(osname)
-    else:
-        parser.description = 'run commands on any distribution'
-        parser.add_argument('osname',
-                            help = 'distribution name to run on, '
-                            '"list" to dump all available distributions, '
-                            '"edit" to open the current config file in a text editor.')
-    parser.epilog = '(c) 2021 Gilles Grandou <gilles@grandou.net>'
-
-    parser.add_argument('-v', '--verbose', action='store_true',
-                        help='verbose output')
-    parser.add_argument('-c', '--config',
-                        help='specify config file')
-    parser.add_argument('-u', '--update', action='store_true',
-                        help='force image update')
-    parser.add_argument('-l', '--link', action='store_true',
-                        help='create a symlink to call "osname" as a shortcut to "runon osname"')
-    parser.add_argument('command', nargs='*', default=None,
-                        help = 'command to execute')
-
-    args = parser.parse_args()
-    if osname:
-        args.osname = osname
-
-    conf_file = find_config_file(args.config)
-    if not conf_file:
-        print('ERROR: config file not found')
-        sys.exit(1)
-
-    if args.osname == 'list':
-        osnames = list_osnames(conf_file)
-        print('Available distributions:')
-        for o in sorted(osnames):
-            print('  {}'.format(o))
-        print()
-        return 0
-    elif args.osname == 'edit':
-        cmd = [ 'xdg-open', conf_file ]
-        ret = subprocess.run(cmd, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL);
-        return 0
-
-    if args.link:
-        make_osname_link(sys.argv[0], args.osname)
-
-    conf = load_config(conf_file, args.osname)
-    image_name = build_image(conf, args.update, args.verbose)
-    ret = run_image(image_name, conf, args.command, args.verbose)
-    return ret
-

setup.py

@@ -1,22 +0,0 @@
-from setuptools import find_packages, setup
-
-setup(
-    name = "runon",
-    version = "2.0.0.dev0",
-    maintainer = "Gilles Grandou",
-    maintainer_email = "gilles@grandou.net",
-    description = "Run your commands on any systems",
-    packages = find_packages(),
-    python_requires = ">=3.6",
-    install_requires = [
-        "pathlib",
-        "pyxdg",
-        "pyyaml",
-        "pytz",
-    ],
-    entry_points={
-        "console_scripts": [
-            "runon=runon.runon:main",
-        ],
-    }
-)

tests.sh

@@ -1,16 +0,0 @@
-#!/bin/bash -e
-
-cat /etc/os-release
-echo
-
-set -x
-sudo id
-python3 --version
-g++ --version | head -1
-gvim --version | head -1
-xterm -e /bin/bash -c "sleep 1"
-date
-set +x
-
-echo "[OK]"
-

uninstall

@@ -1,25 +0,0 @@
-#!/bin/bash
-
-srcdir=$(dirname $(readlink -f $0))
-venvdir=~/.local/lib/runon
-bindir=~/.local/bin
-configdir=~/.config/runon
-
-if [ -e $venvdir/bin/runon ]; then
-    echo "remove links from $bindir"
-    find -L $bindir -samefile $bindir/runon -exec rm -v {} \;
-    find -L $bindir -samefile $venvdir/bin/runon -exec rm -v {} \;
-fi
-
-if [ -d $venvdir ]; then
-    echo "remove virtualenv $venvdir"
-    rm -rf $venvdir
-fi
-
-if [ -e $configdir ]; then
-    echo "remove configs"
-    rm -vf $configdir/runon.default.yaml
-    rmdir -v $configdir || true
-fi
-
-echo "done."